In a warehouse or construction site, a forklift tip over can be a disastrous experience. Surely, a terrible consequence, it will only lead to serious injuries, and worse, could lead to death. According to research, close to a hundred workers die from this accident, and 20,000 have serious injuries. Statistically, it means that every one out of ten in the USA will be a part of an accident each year.

However, if your operators are able to have a clear understanding of the possible causing of operating a truck-mounted forklift for sale or any other forklift, there’s a chance to avoid them. With proper knowledge, you can reduce the risks of this happening on your construction site or warehouse.

An OSHA study also found that over 25% of most forklift accidents often occur because of poor quality operator training. In this article, you will learn about the common causes of forklift tip-overs along with how to reduce the risks. Check out more related articles on automobiles here.

A Quick Turn with an Elevated Load

In forklift accidents, elevated loads pose to be the leading causes of deaths and forklift accidents in the USA. Loads are common contributors towards tip-overs because turning with them means lowering and raising the loads. This causes the truck to exert more force on the truck side than the other does. Hence, affecting stability. Furthermore, laden trucks are prone to become less stable, as the load lifts higher. This means operators will have to maneuver the truck additionally at this point. This is not good because it will only reduce stability. Although operators perceive an elevated load as a time saver and cost reduction strategy, the consequence of a tip-over outweigh the chances of any gains made.

How to Avoid this Risk

When lifting the load, you should carry just one at a time. Once you pick the load, slowly reverse and move. To offload it, safely lower the forks. When handling loads, make sure you do not speed or make sudden turns. You should inform your operators that time-saving strategies would only increase the risks of accidents. Furthermore, have a forklift from experts like Truck Forklifts dealers, who would be able to provide you with the best quality trucks.

Moving Lifted or Suspended Loads

Handling of live loads or those that are above the forks suspended contributes to tip-overs. This can occur from lifting bulk loads or bags that hang from the attachments, rather than set on the pallets. Most accidents occur because of the loads involved here. Unlike a pallet load, which remains stationary, a suspended load will continue to move. Any slight change in movement and this could affect the load’s center of gravity. Eventually, it will cause the truck to tip over.

Preventing this Risk

The best advice is to drive slowly when you have this type of load. It is advisable that you drive in reverse mode, which should encourage you to drive at a slow speed. This should also minimize the load’s momentum and the operator’s view should be clear. You should place the load on the pallet this is a safer option. If the load is a rollover type, do not suspend it with a center sling. Lower it and place bearers on both sides to prevent its movement.
It is best to reduce the transport distance too. The longer the load remains suspended, the more the chances of accidents.

Moving With Heavy Load on an Uneven Ground or Slope

When moving on slopes with heavy loads, there’s a greater chance, the forklift will tip over. Even when driving on uneven ground, this can happen. The only way to move up a slope is straight up, and down, in just two directions. You should never move across in a diagonal way. If you try this, it will only affect the stability of the truck and the weight will fall off to one side of the truck. Eventually, you will encounter a tip over. The same goes when a forklift moves on uneven grounds. The weight will not have a proper distribution and along with the momentum of the forklift moving, a tip-over will occur.

How to Reduce this Risk

As mentioned, you should only drive up and down a slope, avoid moving across. If you have a load, it should face uphill. The forks should have downhill positioned. This should help to improve adhesion, stability, and traction. Furthermore, you should only operate the truck on terrain suitable for it. Only drive a rough terrain truck on uneven ground.
You should also inspect the area. Watch out for debris, curbs, and potholes. Make sure the route is clear when you move the load.

Whether you have a truck-mounted forklift for sale or a Moffett, make sure that you check its load capacity. Only load the amount it can carry and keep these risk-reducing tips in mind the next time you operate the forklift.